Nidec Leroy-Somer FFB Guia De Instalacion página 23

PS4 : INSPECTION, MEASURING & TEST EQUIPMENT MANAGEMENT
RABION
MOTEURS LEROY-SOMER,
We,
France, declare, under our sole responsibility, that the following products :
(F)LS or (F)LSES* , LSMV* series motor associated with FCR or FFB series brake
Or the same series equipped with VARMECA VMA 3x or COMMANDER drive
bearing the following markings on their nameplates:
CE II 3D
comply with:
European Directives:
• Low Voltage Directive
• Electromagnetic Compatibility Directive
• Erp directive:
640/2009 and corrections (valid only for above products marked
• ATEX Directives:
European and international standards:
These products are not concerned by major technical modifications brought in standard EN 60079-0:2012/A11:2013, they are
considered as performing Essential Safety and Health Requirements from ATEX directive.
This conformity permits the use of these ranges of products in machines subject to the application of the Machinery Directive
2006/42/EC, provided that they are integrated or incorporated and/or assembled in accordance with, amongst others, the regulations of
standard EN 60204 "Electrical Equipment for Machinery".
The products defined above may not be put into service until the machines in which they are incorporated have been declared as
complying with the applicable Directive.
Installation of these motors must comply with the regulations, decrees, laws, orders, directives, application circulars, standards, rules
or any other document relating to the installation site. LEROY-SOMER accepts no liability in the event of failure to comply with
these rules and regulations.
Note: When the motors are supplied via appropriate separate electronic inverters and/or controlled by electronic control or monitoring
devices, they must be installed by a professional who will be responsible for ensuring that the electromagnetic compatibility
regulations of the country in which the product is installed are observed.
Signature of plant quality manager:
F.CORNET date: 2017 Jun 21
Installation guide FFB brake motors
5286 en - 2017.09 / c
PREVENTIVE MAINTENANCE
DÉCLARATION UE DE CONFORMITÉ ET
D'INCORPORATION
Moteur (F)LS(ES) associé à un Frein FCR ou FFB
en zone 22
Doc type : S6T002 Rev B du/from 26/11/2014
Bd - Marcellin LEROY 16915 Angoulême cedex 9
For use in the presence of combustible dust
Ex tc IIIB T125°C Dc
2014/35/EU
2014/30/EU
2009/125/CE and regulation (EC) application
2014/34/EU
IEC-EN 60034-1:2010; 60034-2-1:2014; 60034-8:2007/A1:2014;
60034-30-1: 2014
EN 60034-5:2001/A1:2007; 60034-6:1993; 600347:1993/A1:2001;
60034-9:2005/A1:2007; 60034-14:2004 /A1:2007;
60079-0:2012/A11:2013; 60079-31:2014; 60529:1991/A1:2000
IEC 60034-5:2000/A1:2006; 60034-6:1991; 60034-7:1992/A1:2000;
60034-9:2003/A1:2007; 60034-14:2003/A1:2007; 60072-1:1991; 60079-
0:2011; 60079-31:2013;
Consulter le système de gestion documentaire afin de vérifier la dernière version de ce document.
For the latest version of this document, please access the document management system.
M R ☐
M&D
(zone 22) Non Conducting dust
with an asterisk*)
Signature of plant technical manager:
P.CARRIOT date: 2017 Jun 21
Classement/File: S4T032
Révision: B
Page : 2 / 2
Date: 21/06/2017
Annule et remplace/Cancels and
replaces : A du 01/12/2016
I ☐
11