Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Other Publications ......................................................... 2
Important Safety Information ........................................ 3
Identification .................................................................. 4
Specifications ................................................................ 5
Assembly Kits (included with WK100) ........................... 6
Assembly Kits (not included with WK100) ..................... 7
Assembly Instructions ................................................... 8
Greenlee / A Textron Company
Description
The Greenlee Workhorse Bending and Threading Station
is an all-in-one cart with a designated workspace for
bending and threading conduits. It is designed and
tested to accommodate Greenlee electric benders,
RIDGID
chain-type pipe vise. The Workhorse Bending and
Threading Station also provides bend inspection
equipment along with lockable storage for all your
jobsite needs
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tool:
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
Other Greenlee Publications
Instruction Manuals:
• 855GX Electric Bender: Publication 52055798
• 854DX Electric Bender: Publication 52067681
• 555CX Electric Bender: Publication 52055799
• 555
Publication 99936372 (IM 1448)
• 467 Chain Vise 99965445
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
555
RIDGID
Rothenberger™ is a trademark of Rothenberger AG
KEEP THIS MANUAL
2
WK100/WK100-B Workhorse
and Rothenberger™ pipe threaders, and a
®
WK100/WK100-B Workhorse Bending &
Threading Station
Classic Electric Bender:
®
Do not discard this product or throw away!
For recycling information, go to www.greenlee.com.
®
is a
registered trademark
of Textron Innovations Inc.
is a registered trademark of the Ridge Tool Company.
®
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Publicidad
Capítulos
Tabla de contenido
