Assembling The Components; A - Positioning Of The Handle; B - Assembling The Tank Cover - Wirbel SW1 450M ECO Uso Y Mantenimiento

EN
3.1 ASSEMBLING THE
COMPONENTS
3.1.a - Positioning of the handle (Fig.
3)
- Loosen the handwheels (1).
- Position the handle (2) at the required
height then tighten the handwheels (1).

3.1.b - Assembling the tank cover

(Fig. 4)
- Assemble the cover (1) as shown in the
figure, inserting the cover slots onto the
handle support pins (2).
- Exert pressure on the cover hinge (1) un-
til it is correctly coupled.
1
EN-8
2
1
Fig. 3
1
2
Fig. 4