Maintenance And Cleaning; A - Emptying And Cleaning The Clean Water Tank - Wirbel SW1 450M ECO Uso Y Mantenimiento

EN
10.1 MAINTENANCE AND
CLEANING
WARNING:
For information and warnings regarding
maintenance or cleaning, follow the in-
formation given in the "General warnings
during maintenance" in chapter 1 in this
manual.
OPERATIONS TO
PERFORM DAILY
10.1.a - Emptying and cleaning the
clean water tank (Fig. 16)
WARNING:
At the end of the washing operations, it is
compulsory to drain and clean the clean
water tank to prevent deposits or scaling.
After draining the recovery water tank, drain
the clean water tank as follows:
- Position the machine over a drain outlet.
- Remove the hose (1) from the designated
connectors, lower it onto the ground onto
the drain outlet. If the tap (2) is off, turn it
on and let the water drain out completely.
- Take the cover (3) off.
- Wash the inside of the tank, leaving the
drain hose open and adding clean water
through the top opening.
- Once cleaning is complete, lift up the
hose (1) and fit it in the designated slots.
N.B.:
Leave the tap (2) on.
1
2
EN-20
3
1
Fig. 16