Draining The Recovery Water - Wirbel SW1 450M ECO Uso Y Mantenimiento

At the end of the washing cycle or when the
recovery water tank (1) is full, it is necessary
to empty the tank by proceeding as follows:
N.B.:
To dispose of the recovery water, comply
with the standards in force in the country in
which the machine is used.
- Position the machine near to a drain out-
let.
- Disconnect the hose (2) from the support.
- Remove the cap (3) from the hose (2)
and drain all the water contained in the
tank.
N.B.:
The amount of water that comes out can be
modulated by pressing on the end of the tube
(2).
- Put the cap (3) back on the hose (2) and
reposition it on the relative support.
4
9.1 DRAINING THE
RECOVERY WATER
(Fig. 15)
2
1
EN-19
EN
3
2
Fig. 15