Wiring Schematic - Thetford Tecma 2G Silence Plus Manual De Instalación

Installation, con't.

Wiring Schematic

Refer to Fig. G for references.
Ref. Description
A.4 Bezel / Wall Switch Connection
A.5 Controller
A.6 Waste Tank Sensors Connection:
A6.1 = Full Tank Sensor
A6.2 = Mid Tank Sensor
Pump Connection - Solenoid
A.10
Valve
12V DC Power Source
B.1
Connection.
Waste Holding Tank
B.5
A.8 Pump / Motor
K.1 Optional Wire Harness for Hold-
ing Tank Sensors.
Tecma 2G Silence Plus RV Owner's & Installation Manual
A.5
A.8
B.1
K.1
Water Pumps must be powered by toilet controller as shown above. Do not wire
AVISO AVIS
! ! ! ! NOTICE ATTENTION DANGER ATENCIÓN CAUTION
pump directly to a power source so that it is controlled by its pressure-activated
ATTENTION ATTENTION ATTENTION
switch.
Fig. G
7
A.4
A.10
A.6
B.5
A6.1
A6.2
98269 Rev. B (05.30.18)