Error Signal; Warranty - Baxtran SNU Manual De Usuario

User's Guide
STEP 5: BAUD RATE
'b XXXX' will display on screen. The value shown is the baud rate.
Press
Press
STEP 6: SERIAL PRINTOUT PORT CONFIGURATION
'Ads XX' will display on screen. XX values decide the print mode.
Press
Press
Press
XX=99: Indicator will not send out weight data unless when
mode.
XX=01-98: Indicator will send out data after received command.
XX=00: Indicator will send out continuous date automatically reach to 10 times per second.
STEP 7: AUTOMATIC BACKLIGHT
'bAn X' will display. Press
X=1: Automatic backlight. The backlight will on automatically when weight load on the scale, and will
off after unload the weight.
X=0: manual backlight. Press and hold
STEP 8: CONFIGURATION IS DONE
Plug the circuit breaker JP1 into 'off'.
There will shows error signal when the scale have some problem.
Error1: means calibration isn't workable, weight is too light or division is too high.
Error2: means wrong zero, check the load cell if it is damaged.
Error3: means displayed value exceed display range after unit change.
---H---: means overload, loaded weight exceed the full range.
This scale is warranted against defects of manufacturing and materials for a period of 1 year, from
the delivery date.
During this period, GIROPÈS SL will take charge of repairing the scale.
This warranty does not cover defects or damaged caused by misuse, overloading or improper installa-
tion contrary to the recommendations described in this manual.
This warranty does not cover shipping costs for the reparation of the balance.
20
to switch between baud rate of 1200, 2400, 4800 and 9600.
to confirm.
to select digit position of X.
to change the value of the selected digit.
to confirm and return to normal weighing mode.
to change value of 'X'.
or
for 1.5 seconds to turn on/off the backlight.
is pressed in normal weighing

9. ERROR SIGNAL

10. WARRANTY

SNU