Measuring Blood Pressure - Beurer BC 30 Manual De Instrucciones

7. Measuring Blood Pressure

Ensure the device is at room temperature
before measuring. The measurement can be
performed on the left or right wrist.
Attach the cuff
1 2
• Expose your wrist. Ensure that the circula-
tion of the arm is not hindered by tight cloth-
ing or similar. Place the cuff on the inside of
your wrist.
• Fasten the cuff with the hook and loop fas-
• The cuff must be fitted tightly around the
Blood pressure may vary between the right and
3
left wrist, which may mean that the measured
blood pressure values are different. Always
perform the measurement on the same wrist.
If the values between the two wrists are sig-
nificantly different, please consult your doctor
to determine which wrist should be used for
the measurement.
20
tener so that the upper edge of the monitor
is positioned approx. 0.4 in (1 cm) below the
ball of your thumb.
wrist, but must not constrict.