Remote Control; Lift System - Polaris Robotic 9650iQ Sport Manual Del Usuario

Remote Control

The cleaner can be directed using your mobile device as a remote control.
IMPORTANT: Only use Remote Control when in view of the cleaner.
From the main screen, select Remote Control.
1.
NOTE: When in remote control mode, the control box displays
2. You may choose to control the robot using joystick commands or
directional motion control.
You can switch between these modes within the app.
Joystick Control - Press the icons to direct the cleaner forward, backward
and to turn left or right.
Motion Control - Tilt your smart device up (backward), down (forward),
left (rotate left), and right (rotate right) to direct the cleaner. When you
first enter motion control mode, it will automatically calibrate to your hand
position. If you want to re-calibrate the positioning, press the icon in the
upper left hand corner.
3. To exit Remote Control mode, press X.
NOTE: If you experience significant delays between the app command and cleaner response,
you may have a weak Wi-Fi signal or other connectivity challenges that interfere with the
immediacy of the remote control functions. (For more information, see Using iAquaLink in
Wi-Fi to Phone Mode.)

Lift System

The Easy Lift Removal System is designed to assist in retrieving the robot from
the pool. Lift System can be activated at any time during or after a cleaning
cycle.
IMPORTANT: Only use Lift System when in view of the cleaner.
From the main screen, select Lift System to enter automated procedure.
1.
Use the left and right arrow icons to rotate the cleaner to face the wall of
2.
your choice.
3. Press the Lift System icon to drive the cleaner up the wall it is facing.
The cleaner will wait at the water line to be retrieved.
NOTE: To stop the procedure at any time, press and release the button again.
4. When in reach, grab the cleaner handle and begin to pull cleaner out of
the water. The cleaner will quickly expel water to allow for lighter, easier
removal.
NOTE: Never lift the cleaner out of the pool by the floating cable.
Press X to leave the Set Cleaning Mode page and return to the main
5.
screen.
Page 21
.