Cleaner Specifications; General Specifications - Polaris Robotic 9650iQ Sport Manual Del Usuario

Tabla de contenido

Idiomas disponibles

•

Failure to comply with the following warnings could cause damage to pool equipment or personal injury.

•

The Polaris cleaner must be installed and operated as specified.

•

This product is intended for use with permanently-installed pools. Do not use with storable pools. A

permanently-installed pool is constructed in or on the ground or in a building such that it cannot be

readily disassembled for storage. A storable pool is constructed so that it is capable of being readily

disassembled for storage and reassembled to its original integrity.

•

Clean the filter canister in the Polaris cleaner after each use.

•

Do not use the product in your pool if the water temperature is above 95˚ F (35˚ C) or below 55˚ F (13˚ C).

•

USE OF THE POLARIS ROBOTIC CLEANER IN A VINYL LINER POOL

•

Certain vinyl liner patterns are particularly susceptible to rapid surface wear of pattern removal caused

by objects coming into contact with the vinyl surface, including pool brushes, pool toys, floats, fountains,

chlorine dispensers, and automatic pool cleaners. Some vinyl liner patterns can be seriously scratched or

abraded simply by rubbing the surface with a pool brush. Ink from the pattern can also rub off during the

installation process or when it comes into contact with objects in the pool. Zodiac Pool Systems, Inc., is

not responsible for, and the Limited Warranty does not cover, pattern removal, abrasion or markings on

vinyl liners.

General Specifications

The general specifications for the cleaner are as follows:

Control box

supply voltage

Supply voltage

Installed load

Cable length

Cleaner size

(WxDxH)

Weight of Cleaner

Packed weight

Filtration

Cycle lengths

The cleaner is a double-insulated product. A double-insulated electrical appliance

is one which has been designed in such a way that it does not require a safety

connection to ground. The basic requirement for double-insulation is that no

single failure can result in dangerous voltage becoming exposed so that it might

cause an electric shock and that this is achieved without relying on an earthed

(grounded) metal casing. This is achieved by having two (2) layers of insulating

material surrounding live parts or by using reinforced insulation. Therefore,

devices having double-insulated construction, such as this cleaner, do not use a

grounded (three-prong) cord/plug.

CAUTION