Clean The Filter Canister - Polaris Robotic 9650iQ Sport Manual Del Usuario

Page 26
Figure 19. Unplug
4. Remove the cleaner from the pool and untangle all kinks and coils in the
power cable (Figure 20). Start at the cleaner head. Lay the cable in the sun
to loosen any tangling memory.
Figure 20. Untangle

Clean the Filter Canister

The filter canister should be cleaned at the end of each cycle.
1. Remove the cleaner from the water using the Lift System and let the
remaining water drain.
2. Set the unit on four wheels.
3. Push the cover lock (1) and lift the cover (2) until it is secured in the vertical
position. (Figure 21).