Operation - Bemer 3000 Manual Del Usuario

3. Connect the intensive applicator plug to the control unit.

9. Operation

Note
The BEMER plus signal is the proven broad spectrum BEMER
impulse with the same flux densities as before. Every 20 seconds,
five pulses are emitted with a maximum flux density of approx.
35 microtesla (corresponds to level 10). This pulse can only be
accessed through ports 1 to 3, using the programs P1 to P4.
The coil mat and the intensive applicator cannot be used simul-
taneously. Although it is possible to connect them both at the
same time, the coil mat will not function when the intensive ap-
plicator is plugged in. Applicators connected to the socket (6)
have priority over the coil mat which is connected to the back.
62
english