Bemer 3000 Manual Del Usuario página 64

- Within the programs the intensity levels change. You can rec-
ognize the change of intensity by the indicator light of the
respective intensity level. The time display shows progress
in time.
At the end of the therapy period
- The running lights turn off
- An acoustic signal sounds
- After one minute without input the control unit
switches off automatically
To restart the unit, repeat step 2.
If you want to stop the therapy before the programmed time,
press the STOP button. If you want to disable the acoustic
signal (three beeps) at the end of the treatment, keep the
respective button depressed for approx. 2 seconds when
activating the chosen program or level.
9.2 Control unit – intensive applicator
1. Press the 'ON' button.
The indicator light of the ON button and the polarity change
display indicate that the system is ready.
64
english