Cleaning, Servicing, Disposal; Cleaning And Disinfection - Bemer 3000 Manual Del Usuario

To turn the BEMER Control off, move the sliding switch to the OFF
position. You should always turn the BEMER Control off immedi-
ately after use in order to preserve the charge of the 9 V battery.

12. Cleaning, servicing, disposal

12.1 Cleaning and disinfection

- Disconnect the power supply unit from the electrical network
- Clean the control unit, the coil mat and the intensive applica-
tor with a slightly damp, non-abrasive cloth. Only use mild,
non-abrasive cleaners in accordance with manufacturer's in-
structions.
None of the complete system components
are waterproof or water resistant!
Do not allow moisture to penetrate.
Do not use abrasive substances or cleaners
containing alkalines, acids or alcohol!
Do not use any sharp or pointed objects.
81
english