Channel Status; Record-Related Icons; Quick Menu Bar - Avtech AVC708H Manual Del Usuario

3.1.2 Channel Status.

Note: Certain icons are for selected models only.
Original size
Live audio on
Recording
Record mode: Frame
Virtual fence event

3.1.3 Record-related Icons

1) Manual Recording
By defaults, manual recording is on ( ) when the DVR is powered on and a hard disk is installed.
2) Event Recording
The event icons,
events occur and the related record function is on.
3) Timer Recording
When timer recording is on, you will see "
4) HDD Overwritten
Be defaults, the HDD overwritten function is set to ON, and "
Note: To disable this function, right click to display the main menu in the live view, and go to "
(ADVANCED CONFIG.)  "RECORD"  "OVERWRITE".

3.3 Quick Menu Bar

Move to the arrow mark to extend the quick menu bar and show the five functions as follows:
Quick Menu: Open
Fit to screen
Audio off
Human detection event
Record mode: Field
One way pass event
/ / / / /
" on the screen.
DCCS connection OK
Audio playback on
Motion event
Record mode: CIF
Scene Change event
, show on the channel status bar when their respective
" will be shown on the screen.
Click to show the channel switch panel and select the channel you
want. For details, please refer to "3.2.1 Channel Switch" below.
Click to display the playback control panel, and click
latest recorded video clip, or click
Switch to the channel you want first, and click
mode. In this mode, click and drag the red frame on the bottom left of
the screen to move to the place you want to see. To exit this mode, click
.
Click to show the power off panel to either halt or reboot the system.
11
USER INTERFACE
DCCS connection failed
Audio playback off
Alarm event
to play the
to enter the search list.
to enter the zoom-in
"