Playback; Playback Control - Avtech AVC708H Manual Del Usuario

How to go to a preset point:
Step1:

4.4 Playback

Note: This function is NOT available for "GUEST". please refer to "4.2 User Level Creation" at page 13.
Click " " on the quick menu bar to display the playback control panel, and click
video clip, or click
Note: There must be at least 8192 images of recorded data for playback to work properly. If not, the
device will stop playback. For example, if the IPS is set to 30, the recording time should be at least
273 seconds (8192 images / 30 IPS) for the playback to work properly.
Note: During playback, the image size of the recording (FRAME
on the screen.

4.4.1 Playback Control

Fast Forward
Fast Rewind
Play / Pause
/
Stop
Slow Playback
Previous /
/
Next Hour
Repeat
Backup
Step2: Select the numbering within which saves the camera view you want to
see, and wait till you see
disappearing on the DVR status bar.
to enter the search list.
Increase the speed for fast forward. Click once to get 4X speed forward and click
twice to get 8X speed, etc., and the maximum speed is 32X.
Increase the speed for fast rewind. Click once to get 4X speed rewind and click
twice to get 8X speed, etc., and the maximum speed is 32X.
Click to play the latest recorded video clip immediately, and click again to pause.
In the pause mode, click
one frame rewind.
Click to stop the video playback.
Click once to get 1/4X speed playback, and click twice to get 1/8X speed
playback.
Click to jump to the next / previous time interval in an hour, for example, 11:00 ~
12:00 or 14:00 ~ 15:00, and start playing the earliest event video clip recorded
during this whole hour.
Click to set point A and point B in a video clip, and the system will play only the
specified range in that clip.
Click to open the backup menu for video backup.
(command sending) appearing and
, FIELD
once to get one frame forward, and click
15
FREQUENTLY-USED FUNCTIONS
to play the latest recorded
or CIF ) will be shown
to get