Function Setting - RHOSS H58624/B Instrucciones De Uso

2 O I
PERATION NSTRUCTIONS
2.1 ON/OFF SETTING
At the Menu page, by touching ON/OFF, the unit will be turned on/off.
NOTE:

It is defaulted to be OFF upon first power-on.

ON/OFF operation will be memorized by setting "On/Off Memory" to be "On" at the "GENERAL" setting page (see 2.6.1).
That is, in case of power failure the unit will resume running upon power recovery. Once "On/off Memory" is set to be "Off" in case of power
failure, the unit will keep "Off" upon power recovery.

2.2 FUNCTION SETTING

At the Menu page, by touching "FUNCTION", it will go to the Function setting page as shown in the
At the Function setting page, by touching the page turning key (3 or 4), it will access to the last or next page. When setting is finished, by touching
the homepage icon (2), it will directly back to the Menu page; by touching the back icon (1), it will back to the upper menu.
At the function setting page, by pressing the desired function, it will access to the corresponding setting page of this option.
At the function setting page of some function option, by touching "OK", this setting will be saved; by touching the "CANCEL" key, this setting will
be canceled.
NOTE

At the Function setting page with setting of any function changed, if the function is set to be memorized upon power failure, this setting will
be saved automatically and memorized upon next power-on.

When there is submenu for the selected function option, by pressing it the control will go directly the setting page of the submenu.
1
3
figure
36
ELECTA-ECO
below.
2
4