Chromatherapy Or Illumatherapy (Light) Operation - Jacuzzi FINESTRA WALK-IN BATH Serie Instrucciones De Instalación Y Funcionamiento

Increase Speed
Press the (+) button to increase whirlpool speed.
There are 2 whirlpool motor speeds, high and low. The
indicator lights display the setting.
•
1 light on = Low speed
•
4 lights on = High speed
Air Flow
Press the left air valve button to activate the left air
valves, press the right air valve button to activate the
right air valves.
The amount of air induced into the whirlpool jets can be
controlled from maximum to none. Use the (+) and (-)
buttons to increase or decrease air flow.
The indicator lights immediately to the left and right of the air valve buttons indicate the amount of air induced (show
images of max = 4 lights and off = 1 light).
Wave Mode
Press the wave button to cycle the air flow in the jets
from maximum to no air flow.
If the wave mode does not initiate, ensure that you are
in whirlpool operation mode (lights immediately to the
left of the jet button should be brightly lit).
Both right and left air valves are cycled simultaneously
from a closed position (no air) to open.
The indicator lights will display the flow as it cycles from minimum to maximum. To turn off wave mode, press the
(wave) button.

Chromatherapy or Illumatherapy (Light) Operation

Press light button 1st time:
Turns colored lighting ON, use up and down buttons to start
color scroll or select alternate color.
Press light button 2nd time:
Turns white lighting ON, use up and down buttons to select
intensity of white light.
Press light button 3rd time:
Turns all lighting OFF
Colored Lighting Operation
The colored lighting default is constant blue. Pressing the (+) button activates color scroll in this order: blue, teal,
green, yellow, orange, red, pink, purple and then returns to blue and continuously repeats. To stop on a selected color,
press the (+) button again. Pressing the (-) button activates color scroll in this order: blue, purple, pink, red, orange,
yellow, green, teal and then returns to blue and continuously repeats. To stop on a selected color, press the (-) button
again.
White Lighting Operation
There are five white light intensities. Press the (+) button to increase light intensity. Press the (-) button to decrease
light intensity.
Page 18
Low
www.jacuzzi.com
Finestra™ Walk-In Bath
High
Left Right
Installation and Operation