Trouble Shooting - Davey EcoSalt REDOX MC12ORP Instrucciones De Instalación Y Funcionamiento

TROUBLE SHOOTING

WARNING: If EcoSalt REDOX Probe is disconnected or not properly connected to Power Supply then
your EcoSalt REDOX will continue to produce chlorine and may reach dangerous levels. Always ensure
connections are intact and if cell power light is continually on or you discover high chlorine levels in the
pool, turn off the EcoSalt REDOX and check the connections.
No Chlorine Production - Check for
1. Main power outlet switched off / circuit breaker
tripped
Chlorinator not connected correctly into main outlet
2.
ORP CONTROL turned to minimum setting
3.
Chlorinator fuse blown
4.
Dirty or failed Cell
5.
Filter needs back washing
6.
Flow Switch not connected
7.
Insufficient water flow through cell
8.
9. Running times incorrect
10. Pump motor faulty
!
")!
Low Chlorine Production - Check for
1. Faulty or out of date test kit
Dirty Cell - clean if required
2.
3. Filter needs back washing
Cell failing
4.
Pool stabiliser too low
5.
High phosphate level in pool water
6.
pH too high
7.
Salt level too low
8.
Running time inadequate
9.
ORP CONTROL set too low
10.