Installation Instructions; Tools Needed For Installation - Pentair EVERPURE VIRUPURE VP-100-QC Manual Del Usuario

inStallation inStructionS

tools needed for installation

• Phillips Head Screwdriver
• adjustable Wrench
• tube Cutters or utility Knife
• towel
• Pencil
• tape Measure
• Safety glasses
• drip Pan and rags or towels
1. open carton and inspect parts
notE: this system does not include a delivery faucet. to
complete the installation, purchase a faucet with a
stem that allows installation of the supplied
3/8 inch faucet adapter.
installation Parts
Key description
1 VP-100-QC Filter Head/Bracket
2 replacement Filter Cartridge,
Model V-500
3 Cover
4 angle Stop Valve adapter
5 tubing, 3/8 inch
6 Flush Valve Kit, 3/8 inch
7 Faucet adapter, 3/8 inch
8 2 Screws
9 everpure Filter timer
2. verify under-Sink Mounting location
a. Measure up 20 (508 mm) from the base of the
inches
cabinet. Place a mark on the wall of the cabinet. this
mark is one of the two screw locations.
B. Create a second mark horizontally 1-3/4
from the first. use the two marks and start two mounting
screws for the mounting bracket. tighten the screws
until a small gap 1/16
inch
left between the screw head and the cabinet wall.
3. Mount filter Head
arrows on the top of the filter head indicate the direction
of flow.
C. locate the bracket with the mounting holes over
the screws.
d. drop the bracket over and down on the screws.
e. tighten screws as needed.
4 • EvErpurE
ViruPure™ VP-100-QC Multi-Stage Water Filtration System
®
part no.
SH357296-06
eV979826
eV313140
eV312939
eV544600
eV313013
eV312938
eV313150
eV907570
(44.5 mm)
inch
to 3/32 (1.5 to 2.3 mm) is
inch
1
2
1
4
5
8
7
2
a
20 inches
(508 mm)
3
6
9
B
2-1/2 inches (63 mm)