Work Pro WNC 1 Guía Rápida página 10

EN
4. On this windows we can associate the WNC 1 according to next criterias:
a. None. In case we want to disable the WNC 1, we must select this option.
b. To a BlueLine device found in the same LAN. In that case the device will be showed with its MAC
address and name.
Press on it and select "Save" icon to complete the setup
c. Using another MAC address. In case of the BlueLine device is not connected in the LAN (e.g. device is
not present in the installation momentarily and you know its MAC address), type the MAC address in order
to setup the WNC 1 previously.
5. Once selected the linked BlueLine receiver, press Save button to complete the setup.
6. Use the
by the corresponding LED.
7. Use the
associated LEDs. It level will be fixed between +10dB to -40 dB. One point more of this value will be the
unit enter in MUTE state.
Quick Guide
buttons to select the input source from 1 to 8. The selected source will be indicated
buttons to increase or reduce the output volume. The level will be indicated by the
WNC 1