Work Pro WNC 1 Guía Rápida página 7

Once configured the states, it is necessary to link the WNC 1 to a Digiline device. For this, use the next window
Quick Guide
PRIORITY SYSTEM
In this example there are 4 outputs with
different input sources in a configuration for
operate continuously (STATE 1). the
STATE 2 mutes all outputs and active
an input, for example, microphone for
announcements.
This system can be useful if this priority has
not been established by GPI in the Digiline.
1 ZONE EACH TIME
In this example, one stereo source
is sent to each zone successively. As
in previos example, there is a state
that mutes the output and activates
an input, for example, microphone
for announcements.
- 6 -
On this windows we can associate the WNC 1
according to next criterias:
a. None. In case we want to disable the WNC 1,
we must select this option.
b. To a Digiline found in the same LAN. In that
case the device will be showed with its MAC
address and name.
Press on it and select "Save" icon to complete
the setup
c. Using another MAC address. In case of the
Digiline is not connected in the LAN (e.g.
Digiline is not present in the installation
momentarily and you know its MAC address),
type the MAC address in order to setup the
WNC 1 previously.
Once selected the output desired and the linked
Digiline, press Save button to complete the setup.
EN
WNC 1
www.work.es