Configuration - Sartorius YDO01SW-232 Instrucciones De Instalación

Configuration

Operating menu overview for the "UniCOM" interface
(also see the operating menu overview in the "Configuration" chapter of the Signum operating instructions)
Appl
Fn-Key
Setup WP1
COM1
UniCOM
14
OFF *
WP2 RS-232
RS-485
DATAPROT SBI *
XBPI-232
XBPI-485
SMA
PROFIBUS
ETHERNET
SBI standard version
SBI trade version
XBPI-232 *
ADC-232
IS-485 *
ADC-485
Address: 0
...
Address: 126 *
Source IP: 192.168.0.1 *
Source name
Listen port: 49155 *
Subnet mask: 255.255.255.0 *
Gateway IP: 0.0.0.0 *
DNS IP: 0.0.0.0 *
Target IP: 0.0.0.0 *
Target port: 49155 *
Protocol TCP *
UDP
Mode SBI-SRV*
(server)
SBI-C/S
(client)
xBPI
SMA
Modbus/TCP
6.1. Data output manual/automatic
6.1.1 Manual without stability
6.1.2 * Manual after stability
6.1.4 Automatic without stability
6.1.5 Automatic with stability
6.1.7 Print log for PC
7.2. Output: line format
7.2.1 For raw data: 16 characters
7.2.2 * For other apps: 22 characters
6.1. Data output manual/automatic
6.1.1 Manual without stability
6.1.2 * Manual after stability
6.1.4 Automatic without stability
6.1.5 Automatic with stability
6.1.7 Print log for PC
6.3. Time-dependent autom. output
6.3.1 * 1 display cycle
6.3.2 2 display cycles
6.3.4 10 display cycles
6.3.7 100 display cycles
7.2. Output: line format
7.2.1 For raw data: 16 characters
7.2.2 * For other apps: 22 characters