Protective Gas Connection - IDC T2 CoCr Modo De Empleo

▷ Insert the valve insert into the front exhaust
opening of the sintering base.
Fig. 18
1 Valve insert
2 Sintering base
▷ Place the centering disc for the sintering bowl
into the opening for the sintering base.
Fig. 19
1 Centering disc
2 Sintering base
1
2
1
2
I N S T A L L A T I O N
5.7

Protective gas connection

▷ Connect the gas regulator/gauge to the protec-
tive-gas cylinder.
▷ At the bottom left of the furnace rear wall,
insert the protective gas hose into the gas con-
nection. The resistance of the seal must be
overcome, in order to ensure tightness against
leaks.
Fig. 20
E N
49