Cleaning And Maintenance; Cocr Sintering Furnace; Daily Checks; Monthly Maintenance - IDC T2 CoCr Modo De Empleo

C L E A N I N G A N D M A I N T E N A N C E
7

Cleaning and Maintenance

E N 7.1

CoCr sintering furnace

7.1.1 Cleaning
DANGER:
Risk of electric shock!
▷ Prior to any cleaning, pull the mains plug.
NOTE:
Possible damage to the furnace!
▷ Do not us a high-pressure cleaner for the
cleaning!
▷ Use only commercially available, water-based
or non-flammable, solvent-free cleaning
agents for the cleaning.
Prior to cleaning:
▷ Allow the furnace to cool down to the room tem-
perature.
▷ Clean the various components according to
Table 3.
Component
Housing (exterior)
Interior
Insulation materi-
als
Door gasket
Instrument panel
Tab. 3
60
Cleaning
Wipe off with moist, lint-free
cloth
Carefully vacuum out with
vacuum cleaner
Carefully vacuum out with
vacuum cleaner
Wipe off with moist, lint-free
cloth
Wipe off with moist, lint-free
cloth
7.1.2

Daily checks

▷ Check the system for any exterior damage.
▷ Check the function of the safety devices (e.g.
the mains switch).
▷ Check the tightness and proper seating of the
gas line.
▷ Check the function of the fan.
▷ Visually check the following components:
▪ Sealing surfaces on door and furnace shroud
▪ Visible part of the heating rods in the furnace
compartment
▪ Visible part of the thermoelement in the fur-
nace compartment
7.1.3

Monthly maintenance

▷ Carefully vacuum out and clean the furnace
compartment, exhaust openings and exhaust
pipe.
▷ Check the furnace compartment, exhaust open-
ings and exhaust pipe for damage.