Low Battery; Keypad Lock - TensCare perfect BEAUTY Manual De Instrucciones

perfect BEAUTY has eight different,
specially developed
When the unit is first switched on it
automatically enters the programme
FACE 1.
Each time you press and release the P
button, the programme changes and is
shown on the LCD.
Each time you change the programme,
the strength level reverts back to zero.
This is a safety feature to alleviate any
sudden feeling of a surge, as each
programme gives a different sensation.
PHASE SKIP
All the programmes except FACE 1
have seven phases.
The bar column in the middle of the
display increases as each phase starts:
Phase 1 Phase 2
And so on up to the 7
This button can be used to skip a
phase. Press and hold this
button for 3 to 5 seconds to skip and go
to the next phase of the selected
treatment session.

LOW BATTERY

An empty battery symbol will
show when
change the batteries. The unit will shut
down about 2 minutes after this.

KEYPAD LOCK

If you do not press any keys
for 30 seconds, the keypad
will lock so that only the keys marked
CH1- or CH2- will work. This is to avoid
programmes.
Phase 3
th
phase (7 bars).
you need to
24
accidental changes in setting. To
unlock, press either CH1- or CH2- keys.
OPEN CIRCUIT CUTOUT
If the perfect BEAUTY is not correctly
connected to your body, the strength in
the channel which is not properly
connected will automatically reset to
zero. This is to prevent sudden changes
if a broken connection is re-made.
MEMORY
The perfect BEAUTY has a Memory
with three functions:
1) Programme Retention. When you
switch the unit on, it will automatically
start in the programme which was being
used when it was switched off.
2) Usage. Press the phase skip button
and CH2- together and hold down
for 3 to 5 seconds. The display will
show the number of times used and
duration in hours used.
Press the same buttons again to return
to normal controls.
3) Memory Reset. To reset memory to
zero, hold down the phase skip button
and CH1- buttons together for 3 to
5 seconds.
Number of
uses
Time used
in hours