Cautions Regarding Use; Grounding Instructions - Danby DTT100A1WDB Manual De Instructions Pare El Uso Y El Cuidado De Su Unidad

Heat
Many parts of this washing machine are made of
plastic; never place hot or burning objects on or
near the washing machine.
Using Hot Water
Use only water under 50C. If the hot water to be
used is 50C or above, first partly fill the washing
machine with cold water, and then add the hot
water.
Articles that shouldn't be washed or
spun
Don't put shoes, utensils etc. into the tub to wash
or spin. Doing so could cause trouble.
Putting in the clothes
• Do not overload the washing machine.
• Fold up bulky clothing before putting it into the
tub
• Do not let the clothes cover the top of the
agitator. Doing so could cause a decline in the
washing efficiency.
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the
risk of electric shock by providing an escape wire for the electric current. This appliance is equipped
with a cord having a grounding wire with a grounding plug. This plug must be plugged into an outlet
that is properly installed and grounded.
WARNING
Improper use of the grounding plug can
result in a risk of electric shock. Consult a
qualified electrician or service person if the
grounding instructions are not completely
understood, or if doubt exists as to
whether the appliance is properly ground-
ed. If it is necessary to use an extension
cord, use only a three wire extension cord
that has a three blade grounding plug, and
a three slot receptacle that will accept the
plug on the appliance. The marked rating of
the extension cord should be equal to or
greater than the electrical rating of the
appliance.

CAUTIONS REGARDING USE

Water tap
Control the water supply by adjusting the tap
valve If the water pressure is too high, the water
can be sprinkled on the floor
This appliance is equipped with a "Water
Overflow" safety feature, designed to auto-
matically activate the pump in the event of
accidental water overflow. However, this
feature is only operational while the appli-
ance remains connected to an electrical
source.
CAUTIONS REGARDING USE
USE A 3 PRONGED PLUG
5
IMPORTANT
3-pronged plug
Recepticle box cover
3-pronged
recepticle