English - HEINE OMEGA 500 Manual De Instrucciones

HEINE OMEGA
®
HEINE OMEGA
®
with LED and XHL Illumination
Please read and follow these instructions for use of and
keep them for future reference.
Intended use
The indirect Ophthalmoscope HEINE OMEGA
or battery powered device, containing illumination and viewing optics
intended to examine the media (cornea, aqueous, lens and vitreous)
and the retina of the eye.
The product must only be used by qualified medical professionals
and in professional healthcare facilities.
For U.S. only:
Federal law restricts this device to sale by or on the order
of a Physician or Practitioner.
Warnings and safety information
CAUTION! This symbol indicates potential hazardous situations.
Ignoring the corresponding instructions may lead to dangerous
situations of mild to moderate extent.
(Background color yellow; foreground color black).
NOTE! This symbol indicates valuable advice in terms of set up,
operation or maintenance, as applicable. Notes are important,
but not related to hazardous situations.
Product overview
6/40
500
500 UNPLUGGED
500 is an AC-powered
®
1 Headband height adjustment knob
2 Adjustment knob
3 Optics unit
4 Optics overband
5 Position control
6 Filter Control
7 Aperture Control
8 Control Locks
9 Rotary knob
10 Mount for Teaching Mirror
11 Operating lever
12 Bulb cover
13 Lamp
14 Brightness control HC 50 L
15 Guide pin
16 Hole for guide pin
17 Pin
18 Release
19 Detent plate
20 Guide pin
21 Cable guide
22 Headband size adjustment knob
23 Segment cover
24 HC 50 L connecting cable with UNPLUGGED socket
Setting up
The HC 50 L brightness controller can be used with XHL lamps
and the LED module.
OMEGA 500 can be used with HEINE LED or 5 Watt XHL bulbs.
The setup and operation of the HEINE power sources are described
in a separate instruction document.
Operation with the HEINE® mPack or EN50
To operate the OMEGA 500 with the mPack or EN50, connect the
short cable (24) from the HC 50 L brightness control (14) to the con-
necting cable (Cinch) and secure it in the cable guide (21). Connect
the connecting cable (Cinch) to the mPack or the EN50 (Fig.1).
Operation with the mPack UNPLUGGED
To operate the OMEGA 500 with the mPack UNPLUGGED, first
remove the cover from the rear segment (23) on the headband. To
do this, slide the segment cover from the headband in the direction
of the arrow (Fig. 2).
Next, fit the mPack UNPLUGGED to the headband. To do this, hold
the headband with your left hand and using your right thumb, slide
the mPack UNPLUGGED to the left until it latches audibly. Connect
the short cable (24) from the HC 50 L brightness control (14) to the
mPack UNPLUGGED (Fig. 3).
Operation with Power supply for HC 50 L brightness controller
To operate the OMEGA 500 with power supply, please connect the
short cable (24) of the brightness controller HC 50 L (14) with the
connection cable (UNPLUGGED connector) secure it in the cable
guide (21). Connect the connecting cable (Cinch plug) with the power
supply (Fig. 1).
med 0912 2019-04-05

ENGLISH