Environmental Protection; Maintenance And Service - Skil 1800 Manual De Instrucciones De Funcionamiento Y Seguridad

Minimum Radius: 70 mm
Maximum Radius: 221 mm
If you want to cut the circle between 70 mm to 121 mm radius,
you could assemble the parallel guide according to Fig 13.
If you want to cut the circle between 121 mm to 221 mm radius,
you could assemble the parallel guide according to Fig. 14.
You could not cut the circle between 172 mm to 186 mm radius.
Note:
1. Wing nut
2. Guide bar
3. Parallel guide
4. Center hole
5. Bolt with flange
Put the center hole on the parallel guide onto the center
on work piece. Put a nail less than 6 mm to the center hole
to fix the parallel guide. Cutting the work piece by direction
of clockwise. (see Fig. 15)
Note:
1. Nail
2. Center hole
3. Parallel guide
BEARING GUIDE
You could operate the tool conveniently with for home
furniture like desk, bed, seat etc with the bearing guide.
The tool could move with the bearing guide agilely to
assure precise cutting. (see Fig. 16)
Use the fixing nut (1) to assemble the bearing guide to the
base plate. Loose the Fixing nut (2) to adjust the distance
between cutting bits and the bearing guide seat. When
achieve proper distance, screw the Fixing nut (2) tightly.
(see Fig. 17)
Note:
1. Fixing nut
2. Adjusting nut
3. Fixing nut
4. Bearing guide seat
When operating the tool, please keep the bearing guide
tightly to the edge of the work piece. (see Fig. 18)
Note:
1. Work piece
2. Cutting bit
3. Bearing guide seat

MAINTENANCE AND SERVICE

Maintenance and cleaning
•
– Before any work on the machine itself, pull the main plug.
– For safe and proper working, always keep the
machine and ventilation slots clean.
– In extreme working conditions, conductive dust
can accumulate in the interior of the machine when
working with metal.
– The protective insulation of the machine can be
degraded. The use of a stationary extraction system
is recommended in such cases as well as frequently
blowing out the ventilation slots and installing a
residual current device (RCD).
– If the machine should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for
Skil power tools.In all correspondence and spare
parts order, please always include the 10-digit article
number given on the type plate of the machine.
After-sales Service and Customer Assistance
•
– Our after-sales serice responds to your questions
concerning maintenance and repair of your product
as well as spare parts. Exploded views and
information on spare parts can also be found under:
www.skil.com.br
– Our customer consultants answer your questions
concerning best buy, application and adjustment of
products and accessories.
Guarantee
•
– We guarantee Skil appliances in accordance with
statutory/country-specific regulations (proof of
purchase by invoice or delivery note).
– Damage attributable to normal wear and tear, overload
or improper handling will be excluded from the guarantee
– In case of complaint please send the machine,
undismantled, to your dealer or the Skil Service
Center for Electric Power Tools.
Warning!
– Freight and insurance costs are charged
to the client, even for warranty claims.

ENVIRONMENTAL PROTECTION

The machine, accessories and packaging
should be sorted for environmental-
friendly recycling.
If you discard your machine, accessories, do not
put off in the trash, please give it to a technical
service Skil. It will provide a better destination
according the politics of preservation of the environment,
recycling parts according the local laws.
Subject to change without notice.
20