Connecting - Siemens SITRANS FST020 IP65 NEMA 4X Guia De Inicio Rapido

Connecting

Note
If the transmitter is not already mounted and cabling has not been run, proceed to Mounting
the Transmitter (Page 7) before connecting power.
Hazardous Voltage
May cause death or serious personal injury. Disconnect power before working on this
product.
1. Using a flat-head screwdriver, loosen the six securing screws from the Keypad Enclosure
2. To determine type of power connection refer to the following part numbers:
3. Pull either the AC or DC wires through transmitter case cable gland and into the
FST020 IP65 NEMA 4X Quick Start
Operating Instructions, 03/2012, A5E03086489-05
WARNING
Cover and open cover.
– 7ME3570-1HA3 = AC Power
– 7ME3570-1HB3 = DC Power
Note
The product nameplate also lists the actual power that can be applied to the unit.
transmitter case before wiring power connector.
3
11