3.2 Programming The Transmitter - Siemens SITRANS FST020 IP65 NEMA 4X Guia De Inicio Rapido

Connecting

3.2 Programming the Transmitter

5. The drop down menu lists the following sensor selections:
6. For this example, select the sensor model that appears on the sensor label then press
7. Press <Down Arrow> key to select [Sensor Size]. Press <Right Arrow> key and scroll to
8. At [Sensor Mount Mode] press <Right Arrow> key. Scroll to select [Reflect] or [Direct]
9. IMPORTANT: Press the <Up/Down Arrow> keys to scroll to [Spacing Method] and
10. Sensors can now be mounted. Refer to the sensor mounting procedures and select the
Note
Proceed back to Sensor Installation (Page 25) if necessary.
11. Once sensor mounting is complete proceed to Commissioning (Page 31).
24
– 1011 Universal
– 1011HP-T1 - Usable -40 to 120°C, recommended for Ø Temperature <40°C;
Standard.
– 1011HP-T2 - Usable -40 to 120°C, recommended for Ø Temperature >40°C - <80°C;
Named as high temperature.
– 1011HP-T3 - Usable -40 to 120°C, recommended for Ø Temperature >80°C <120°C;
special request.
– 1021 Sensor
– 991 Universal
Note
The meter will automatically recommend a sensor depending on the application data
that has been entered.
<ENTER>.
select the sensor size that matches the size indicated on the sensor label.
mount then press <ENTER>.
[Number Index]. Record these numbers. They will be used to mount the sensors.
mounting mode desired.
FST020 IP65 NEMA 4X Quick Start
Operating Instructions, 03/2012, A5E03086489-05