Measuring Weight Only; Setting User Data; Taking Measurements - Beurer BF Limited Edition Instrucciones Para El Uso

Báscula de vidrio para diagnóstico
Ocultar thumbs Ver también para BF Limited Edition:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15
and rechargeable batteries must be disposed of in specially marked collection containers, at
toxic waste collection points or electrical product retailers. You are legally obligated to dispose of
the batteries.
Note: Batteries containing pollutants are marked with the following symbols: Pb = Battery con-
tains lead, Cd = Battery contains cadmium, Hg = Battery contains mercury.

2.2 Measuring weight only

Step onto the scale. Stand still with your weight distributed equally on both feet. The scale begins to take
measurements straight away. If the display appears continuously, the measurement has finished.
If you step off the weighing area, the scale switches off after a few seconds.

2.3 Setting user data

To measure your body fat percentage and other physical data, you must enter your personal user para meters.
The scale has 10 memory positions in which you and other members of your family can save and recall personal
settings.
Switch on the scale (tap the standing surface). Wait until the display shows "0.0".
Then press "SET". The first memory position will appear flashing on the display. Now you can enter the following
settings:
Memory position
Body size
Age
Sex
Degree of activity
– Modifying values: Press
– Confirming entries: Press the "SET" button.
– After the values have been set and displayed again, "0.0" appears on the display.
– Then the scale is ready for measuring. If you do not carry out a measurement, the scale switches off automa-
tically after several seconds.
Degrees of activity
Selection of the degree of activity must refer to the medium and long term.
Degree of activity
1
2
3
4
5
All parameters must be entered before the body fat and other values can be entered.

2.4 Taking measurements

After all parameters have been entered, you can now measure your weight, body fat and the other data.
Switch on the scale (tap the standing surface). Wait until the display shows "0.0".
– Select the memory space where your personal data are stored by repeatedly pressing the
These are then displayed in sequence until "0.0 kg" appears.
– Step onto the scale with bare feet and make sure that you are standing still with equal weight distribution.
Stand on the stainless steel electrodes with both feet.
Note: Your feet, legs, calves and thighs must not touch each other.
Otherwise the measurement cannot be performed correctly.The scale immediately begins to measure your
weight.
1 to 10
100 to 220 cm (3'-03" to 7'-03")
10 to100 years
male ( ), female ( )
1 to 5
or
or press and hold for more rapid progress.
Physical activity
None.
Low: A small amount of light physical effort (e.g. short walks, light garden work,
gymnastic exercises).
Medium: Physical effort for 30 minutes at least 2 to 4 times a week.
High: Physical effort for 30 minutes at least 4 to 6 times a week.
Very high: Intensive physical effort, intensive training or hard physical work for at least
one hour daily.
8
Pb
Cd
Hg
or
keys.

Publicidad

Tabla de contenido
loading

Tabla de contenido