Crouzet CTR48 Manual Del Usuario página 101

13. Input modes: Timing
Function Note: in Timer mode, the Gate input has the
function of a display buffer: while it is active,
no counting is displayed. The new value is
update in the display when counting stops.
Start
tcCb
Start
tcCbb
Start
tcCAb
Start
tcSb
Start
tcSAb
Start
tcAuto
PnP: Count on rising edge
nPn: Count on falling edge
Inp A: no function
Inp B: Start/Stop
Cumulative timing as long
as B is active
Add: Display 0 --> Preset
Sub: Display Preset --> 0
Inp A: no function
Inp B: Start/Stop
Add: Display 0 --> Preset
Sub: Display Preset -> 0
Inp A: Start
Inp B: Stop
Cumulative timing
Add: Display 0 --> Preset
Sub: Display Preset -> 0
Inp A: no function
Inp B: Start/Stop
Single measurement as long
as B is active, automatic reset
before any new timing
Add: Display 0 --> Preset
Sub: Display Prest --> 0
Inp A: Start
Inp B: Stop
Single measurement,
automatic reset before any
new timing
Add: Display 0 --> Preset
Sub: Display Preset --> 0
Inp A: no function
Inp B: no function
Control of the timing only via the
RESET (manual or electrical)
Add: Display 0 --> Preset
Sub: Display Preset --> 0
The Gate input has a display
buffer function