Publicidad
Idiomas disponibles
Idiomas disponibles
Total measurement [A + B]
Inp A: frequency input A
Inp B: frequency input B
Frequency measurement
with direction recognition
[Quad]
Inp A: frequency input 0°
Inp B: frequency input 90°
6.8.5.2 Main menu for configuration
Main menu for matching the
input frequency and display
Multiplication factor
Multiplication factor can be
programmed from 00.0001 to
99.9999. The setting 00.0000
will not be accepted
Division factor
Division factor can be pro-
grammed from 01.0000 to
99.9999. The setting <01.0000
will not be accepted
Display mode
Calculation and display of the
frequency/speed in 1/s
Calculation and display of the
frequency/speed in 1/min
Decimal point setting
Decimal point
(determines the resolution)
0
0.0
0.00
0.000
Moving average
AVG off off
AVG 2 with 2 measurements
AVG 5 with 5 measurements
AVG 10 with 10 measurements
AVG 20 with 20 measurements
no decimal place
1 decimal place
2 decimal places
3 decimal places
Start-up delay (Start-up time)
Programmable from 00.0 to
99.9 s. At the start of a meas-
urement the measurement re-
sults within this time-period are
ignored
Waiting time
Waiting time programmable
from 00.1 to 99.9 s. This value
specifies how much time
should elapse, after the last
valid edge, before zero is to
be displayed.
Display colour
(only for red-green version)
Display colour
upper line
lower line
Display colour
upper line
lower line
6.8.6 Main menu for reset mode
Setting the reset mode
Manual reset (with red key)
and electrical reset (reset
input) for adding/subtracting
output operations with the
batch counter/totalizer:
<3s main counter = 0/preset 2,
>5s totalizer = 0/preset 1,
electrical reset: main counter =
0/preset 2
No reset possible (red key and
reset input inhibited)
Electrical reset (reset input)
for adding/subtracting output
operations with the batch
counter/totalizer: electrical
reset: main counter =
0/preset 2
red
red
red
green
12
Publicidad
