Kenmore 911.95281 Manual De Uso página 22

CLEANING MATERIALS
o Dishwashing detergent
o 'Warm water
o Soft cloth
Molded rib Clear groove
in stem
if(_ CAUTION: Be sure the -'_
oven light switch is in
the off position. Do not
touch a hot light bulb
with wet hands or a wet cloth.
Wait until the bulb has cooled
and use a dry cloth. Never touch
the live collar of the bulb. If you
are replacing a broken light
bulb, make sure the power
supply is off.
,, , Glass retainer
Sprin_:_
TO REMOVE
1. Be sure the control knob is in
the OFF position.
2. Pull straight off the stem. Using a
piece of string can make removing
the knob easier. Slip the string
under and around the knob,
pulling straight out.
TO CLEAN
Wash the knob thoroughly with soapy
water. Dry completely with a soft
cloth. DO NOT let the knob soak.
TO REPLACE
1. Check the back of the knob.
2. The molded rib of the knob is
designed to fit perfectly onto the
knob stem.
3. Align the molded rib to the clear
groove in the knob stem. Push the
knob back as far as it will go.
Bulb ..............._L
Live collar
Glass cover
TO REPLACE
1. Unscrew glass cover and remove.
2. Unscrew the light bulb.
3. Replace the bulb with a 3W"
40 watt appliance bulb.
4. Replace the cover.
22