Clock, Timer& Ovencontrol; Display; Indicator Lights - Kenmore 911.95281 Manual De Uso

OPERATION
®
Clock, Timer& OvenControl
Your new range CLOCK, TIMER and OVEN operations are simple and easy to understand.
The HOUR/MIN. arrow pads allow
you to set the exact time you need.
The display in the center of your
control will show:
1. The time of day CLOCK.
2. The amount of time you choose
when using the TIMER.
3. The temperature selection as you
turn the OVEN CONTROL knob.
Your new control has individual
indicator lights that will show you
the operations you have chosen.
As you read through your manual,
you will find what each of these
indicators are used for and how they
will help you in understanding your
new control.
If the display flashes an "F"
followed by a number and beeps
continuously, you have a function
error code. Note the number after the
"F". Turn the OVEN CONTROL knob
to the OFF position, Allow the oven
to cool for about 1 hour and retry the
oven operation. If the problem repeats
call for service. Advise the technician
what the flashing code was.
Your new control has the special
feature of blacking out the display
(have nothing showing in the
display). To activate this feature:
If the time of day is showing in the
display, press the CLOCK pad once.
To bring back the display from the
time of day black-out, press the
CLOCK pad twice.
When the power to your range is
turned on for the first time, the
display will flash the time when the
power was turned off. You can set
the clock at this point or press the
CLOCK pad to stop the flashing.
As a safety feature, this oven will
automatically shut off if it has been
left on for more than 12 hours. This
feature can be disabled. See page i6.
11