Oven Light Bulb - Kenmore 911.95281 Manual De Uso

PROBLEM POSSIBLE CAUSE
Oven controls set
incorrectly. zones work, but
oven will not
turn on.
'Oven temperature Thermostat calibration. See the adjustments
seems inaccurate, described following
Oven will not Clean cycle is not
unlock, finished.
OVen ................
.. light does
not work.
POSSIBLE SOLUTION
cooking Check the oven
section on setting the
oven control correctly.
a. Light swiiCh in off
position.
this section.
Oven temperature must
drop below the lock
temperature before the
door will unlock.
a,Check oven light switch
on the control panel.
Oven did not
clean or results
were poor.
b, Oven light bulb
burned out.
. ,,, , ,,,,,,,,,,,,,,,,,',,, , i,,mnlU. , i i i, /i,/ , i ...... ll,, . .....
a. Controls were not
set properly.
b. Clean cycle was
interrupted.
c, Oven was soiled
heavily.
'Oven smokes".'" a. Dirty Ovenl
b,Check the oven
light bulb.
a,Check the self-cleaning
section of this manual.
b,The normal clean cycle
should last 4 hours.
c, Heavy spillovers should
be removed before the
cycle is set. You can
also repeat the cycle.
...... a'Check for heavy .......................
spillover.
b. Improper use of
aluminum foil.
b.Use of foil not
recommended.
Ca
"oven emits''""odor.'" a.
Broiler pan containing
grease left in the oven.
Oven insulation may
emit odor during the
first few usages.
c.Clean pan and grid after
each use.
I III iiiii ........... iiiiiiiit :_
a.Put oven through
se_f-c/ean cycle to
speed up proceSs of
odor "wearing off."
b, Failure to wipe out
excess soil prior to
the self-clean cycle.
b,Wipe excess soil
off before beginning
self-clean cycle.
26