Kenmore 911.95281 Manual De Uso página 28

®
"BOIT YOURSELF"
TEMFERATURE
ADJUSTMENT
You may feet that your new oven cooks
differently than the oven it replaced. We
recommend that you use your new oven
a few weeks to become more familiar
with it, following the times given in your
recipes as a guide.
If you think your new oven is too hot
(burning foods) or not hot enough
(foods are undercooked) you can adjust
the temperature yourself. The appearance
and texture of foods is a better indicator of
oven accuracy than an oven thermometer
to check the temperature setting of your
new oven. These thermometers can
vary by 20-40 °. fn addition, the oven
door must be opened to read these
thermometers. Opening the door will
change the temperature of the oven.
To decide how much to change the
temperature, set the oven temperature
25 ° higher (if foods are undercooked) or
25 ° lower (if foods are burning) than the
temperature in your recipe, then bake.
The results of this "test" should give you
an idea of how much the temperature
should be changed.
lm
,
While the OVEN CONTROL knob is
in the OFF position, press and hold,
at the same time, the HOUR UP and
DOWN arrow pads until the display
shows a two digit number.
Press the HOUR UP arrow pad to
increase the temperature from the
original setting up to +35°F hotter.
or
Press the HOUR DOWN arrow pad to
decrease the temperature from the
original setting down to -35°F cooler.
3. When this adjustment has been
made the display will return to the
time of day.
This adjustment will remain in memory
until these steps are repeated, and
a new temperature is selected, it
will remain in memory even after a
power failure.
This adjustment will not affect the Broil
or Clean temperatures.
28