Sub-Zero PRO 48 Guía De Uso Y Mantenimiento página 14

S U B - Z E R O
I C E M A K E R
The ice maker in the PRO 48 is fully auto-
matic and has been tested at the Sub-Zero
factory.
To turn the ice maker on or off, depress the
ICE M KER
panel. When the ice maker is on, it will be
operating any time the drawer is closed.
IMPORT NT NOTE:
system can be used with the PRO 48,
provided there is constant water pressure of
1.4 bar to 8.3 bar supplied to the unit at all
times.
14
P R O 4 8 U S E & C A R E
O P E R AT I O N
key pad on the control
reverse osmosis
I C E P R O D U C T I O N
The ice maker is designed to produce
enough ice for normal family use. The timing
of ice making cycles will vary depending on
load conditions, door and drawer openings
and room temperature. On average, you can
expect a cycle of ice (eight cubes per cycle)
every two hours.
For extra ice capacity, remove the ice bucket
with the ice maker system on and allow the
drawer to fill with ice.
IMPORT NT NOTE: Removing the ice
bucket will not increase the rate of ice
production.
If ice is not used on a regular basis it tends
to fuse together. To avoid this, empty the ice
bucket periodically allowing it to replenish
with a fresh supply.