Setting The Clock; Timer - Panasonic SC-AK640 Manual Del Usuario

Timer

Setting the clock

Setting the clock
This is a 24-hour clock.
1 Press and hold [– CLOCK/TIMER] to select "CLOCK".
Each time you press and hold the button:
CLOCK ➞
Original display
2
(
Within 8 seconds or so
Press [4, REW / ] or [¢,
3 Press and hold [– CLOCK/TIMER] to finish setting the
time.
Displaying the clock
Press and hold [– CLOCK/TIMER] once when the unit is on or
in standby mode.
The time is displayed for a few seconds.
Note:
Reset the clock regularly to maintain accuracy.
Using the play or record timer Using the play or record timer
You can set the timer to come on at a certain time to wake
you up (play timer) or to record from the radio or music port
source (record timer).
Play timer and record timer cannot be used together.
Turn the unit on and set the clock.
Timer Action
Play timer Prepare the music source you want to listen to;
cassette (DECK 2 has the priority), disc number
(1~5), radio or music port source, and set the
volume.
Record Check the cassette's erasure prevention tabs
\
timer ( page 12), insert the cassette in DECK 2 and
tune to the radio station (
music port source (
Press and hold [– CLOCK/TIMER] to select the timer
1
function.
Each time you press and hold the button:
CLOCK ➞
Original display
˚PLAY : to set the play timer
˚REC : to set the record timer
(Proceed to the next step
2 Press [4, REW / ] or [¢,
starting time.
3 Press and hold [– CLOCK/TIMER] to confirm.
˚ PLAY ˚ REC
➞
)
/ FF] to set the time.
\
page 13) or select the
\
page 17).
˚ PLAY ˚ REC
➞
)
within 8 seconds
/ FF] to set the
Play timer indicator
Start time
Record timer indicator
4 Repeat steps 2 to 3 to set the finishing time.
To activate the timer
Press and hold [– ˚PLAY/REC] to turn on your desired
5
timer.
˚ PLAY
no display (off)
Press [y] to turn off the unit.
6
The unit must be off for the timers to operate.
Other basic operations Other basic operations
To Action
change the
Repeat steps 1 to 4 and 6 (
settings
above).
1) Press and hold [– ˚PLAY/REC] to clear the
change the
source or timer indicator from the display.
volume 2) Make changes to the source or volume.
3) Do steps 5 to 6 (
check the Press and hold [– CLOCK/TIMER] successively
to select ˚PLAY or ˚REC.
settings
Press and hold [– ˚PLAY/REC] to clear the
cancel
timer indicators from the display.
If you use the unit after the timers are set
After using, check that the correct tape/disc are loaded
before turning the unit off.
Note:
• The play timer will start at the preset time with volume increasing
gradually to preset level.
• The record timer will start 30 seconds before the set time with the
volume muted.
• The timer comes on at the set time everyday if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
fi nish time setting will not be activated.
• If MUSIC PORT is selected as the source when the timer comes on,
the system turns on and engages MUSIC PORT as the source. If
you wish to playback or record from the portable audio equipment,
just activate the equipment's play mode and increase the volume.
(See the portable audio equipment's instruction manual.)
Finish time
˚ REC
➞
\
see left and
\
see above).
15
RQT8043