Setting To Max. Curve Duty; Start/Stop - Grundfos Hydro Multi-E Manual Del Usuario

9.3 Setting to max. curve duty

Press continuously to change to the max. curve of the Hydro
Multi-E (top light field flashes). When the top light field is on,
press for 3 seconds until the light field starts flashing.
To change back, press continuously until the desired setpoint
is indicated.
H
Q
Fig. 24 Max. curve duty

9.4 Start/stop

Start the Hydro Multi-E by continuously pressing until the
desired setpoint is indicated.
Stop the Hydro Multi-E by continuously pressing until none of
the light fields are activated and the green indicator light flashes.
13