Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MANUAL DE INSTRUCCIONES CODIGO 80184 REV A Jul/2016
DESCRIPTION
It does not heat
Error "Err"
The pump rotates but
does not generate
vacuum
Pump does not work
J
.P. SELECTA s.a.u.
9. TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS:
- Capacity of the pot:
- Maximal vacuum:
- Temperature range
- Time range
- Resolution
- Set error
- Heating power
- Dimensions:(cm) High:
- Weight:
- Voltage supply
SPARE PARTS
To guarantee the safety of the equipment, the spare parts must
be purchased from ICC.
Vacuum measure gauge
Vacuum pump
Temperature probe
Hotplate
Basket with lid
Switch
Control circuit board
Solid relay
10. TROUBLESHOOTING
CAUSE
Probe is not correctly installed
The heating element is melted
Probe is not correctly connected
Make sure the probe is in its place If the probe is not in use, it has to be in its
Probe is not connected
The probe cable is cut
There's a gasket that does not
close properly
Pump does not work correctly
11. WARRANTY
This product is guaranteed for one year. The guarantee does not
cover damages caused by an incorrect use or causes beyond the
control of ICC.
Any manipulation of the equipment by unauthorized personnel by
ICC cancels the guarantee automatically.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - www.jpselecta.es
(Sujetas a modifi caciones sin previo aviso)
Width:
Depth:
RESOLUTION
Check the placement of the probe as indi-
cated in paragraph 7
Contact the technical service for replace-
ment
Check the placement of the probe as indi-
cated in paragraph 7
place
Connect it as shown in paragraph 7
Check the cable
Check the lid gaskets and the tubes
Check that the pump sucks air
Contact the technical service for replace-
ment
10.5 litros
-0,8 bar
10-150ºC
1-99 min
1ºC
1ºC
2000W
40
47
47
20 kg
230V/50 Hz
16012
24207
43120
32049
05920
20017
29304
36027
Tel 34 937 700 877 Fax 34 937 702 362
Pag.: 12
Publicidad
Tabla de contenido
