How To Install Your Canopy Housing; How To Assemble Your Ceiling Fan Blades - Fanimation PYLON LP8277LBN Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

How to Install Your Canopy Housing

NOTE: This step is applicable after the neccessary
wiring is completed.
1.
Assemble canopy by rotating key slot in canopy
over shoulder screw in hanger bracket, taking care not
to pinch the wires. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that was
previously removed. (Figure 1)
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
2.
Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket
utilizing the key slot twist-lock feature. (Figure 2)

How to Assemble Your Ceiling Fan Blades

INSTALLATION NOTE
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled may
result in damage to the fan blades.
WARNING
To reduce the risk of personal injury, do not bend the
blades when installing, balancing or cleaning the fan.
Do not insert foreign objects in between the rotating
blades.
1.
Carefully slide the blade through the slot as shown.
Securely fasten the three blades with washer head
screws with fiber washers. Do not over-tighten.
(Figure 1)
HARDWARE USED:
3/16"-24
Washer Head
Screws
Fiber Washers
11
Shoulder Screw
Figure 1
Canopy Screw
Cover
Figure 2
3/16"-24 Washer Head Screws
with Fiber Washers
(3 per blade)
Figure 1
x 9
x 9

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido