Locking The Controls; Over-Temperature Protection; Residual Heat Warning - Orima ORF-61 VIT Manual De Instrucciones

Locking the Controls

• You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones on).
• When the controls are locked, all the controls except the ON/OFF control are
disabled.
To lock the controls
Touch the keylock control. The indicator next
to the keylock will light up
To unlock the controls
1. Make sure the ceramic hob is turned on.
2. Touch and hold the keylock control for a while.
3. You can now start using your ceramic hob.
When the hob is in the lock mode,all the controls are disable except the ON/OFF
you can always turn the ceramic hob off with the ON/OFF control in an emergency,
but you shall unlock the hob first in the next operation

Over-Temperature Protection

A temperature sensor equipped can monitor the temperature inside the ceramic
hob. When an excessive temperature is monitored, the ceramic hob will stop
operation automatically.

Residual Heat Warning

When the hob has been operating for some time,there will be some residual
heat.The letter "H "appears to warn you to keep away from it.
Auto Shutdown
Another safety feature of the hob is auto shutdown.This occurs whenever you
forget to switch off a cooking zone.The default shutdown times are shown in
the table below:
Power level
Default working timer (hour)
1 2 3
8 8 8
EN-10
4 5 6
4 4 4
,
7 8 9
2 2 2