Temperature Range - Honeywell AM-1 Serie Instrucciones De Instalación

Install spring, diffuser and lower assembly:
A. Insert spring onto diffuser.
B. Insert diffuser with spring end first into body.
C. Fit valve top assembly into lower assembly and insert into valve.
D. Tighten lower nut and hold while tightening upper nut.
E. Reposition handwheel and insert screw. Turn handwheel to
desired temperature setting.
UPPER NUT
LOWER NUT
O RING
H
Fig. 3. AM-1 Series valves assembly.
AM-1 Series™ is a trademark of Honeywell International, Inc.
®
ASSE is a registered trademark of the American Society of Sanitary Engineering.
®
CSA is a registered trademark of the Canadian Standards Association.
®
IAPMO is a registered trademark of the International Association of Plumbing and Mechanical Officials.
®
ASTM is a registered trademark of the American Society for Testing and Materials.
®
Teflon is a registered trademark of E.I. du Pont de Nemours and Company.
HANDWHEEL
RETAINING RING
TOP ASSEMBLY
LOWER ASSEMBLY
DIFFUSER
SPRING
H C
MIX
VALVE BODY
M23941
Table 1. AM-1 Series Replacement Kits

Temperature Range

80° - 120° F (26°-49°C) ("C")
100° - 145° F (38° - 63° C)
3
AM-1 SERIES™
Model No.
AM-1-020 RP
AM-1-025 RP
62-3075EFS—01