Installing The Cut Device - Dascom Tally T2380 Guia De Instalacion

Installation

Installing the cut device

A
B
8
When the fanfold paper is in the park position you can install the cut device. Pro-
ceed as follows:
Turn off the printer first!
STOP
* Not available on some printer models.
First remove the soundproofing cover* from your printer by
tilting it at a 45 degree angle and then pulling up (
Then remove the front cover (
to an angle of 45 degrees. Then raise the right side of the
cover slightly and subsequently pull it out also on the left
side by applying gentle pressure towards the right.
Quick start guide
A ).
). To do this, raise the cover
B