Paper Types; Safety Notes - Dascom Tally T2380 Guia De Instalacion

Quick start guide

Paper types

Safety notes

Your printer can use both fanfold forms and single sheets. The specific paper type
can be processed either via the standard paper sources (front tractor 1, optional rear
tractor for the 2Tmodel, and manual sheet feeder slot) or via an optional tractor and
an optional automatic single sheet feeder.
However, if the cut device is installed, it is not possible to use the optional single
sheet feeder.
For information regarding the printable form length and width as well as further
specifications please refer to the section Technical Data and Paper Specifications
at the end of this manual and in the Paper specifications section in the User Guide.
Before you use the cut device make sure you read the following safety notes:
If you have to remove any short pieces of paper remaining in the device, turn off
STOP
the printer first.
Do not insert any unsuitable materials into the device openings as this may dam-
age the mechanical system.
Operation is only permitted with the cut device lowered in the correct position.
Please read the safety-related information in the standard operating instructions.
Introduction
3