Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2. MEASURE INSTALLATION
Dimensions for the most common installation are shown beside.
The minimum hood distance above cooktop must not be less than 30''. A maximum of
36" above cooktop is highly recommended for best capture of cooking impurities.
Distances over 36" are at the installer and users discretion.
Since framework must be flush to ceiling, 4 decorative flue covers have been created to fit
both hood widths and different ceiling heights. Refer to table below to choose the model that
fits your needs.
D
F
ECORATIVE
LUE COVER
M
A (H
) W
ODEL
EIGHT
IDTH
AEIP422
12"
42"
AEIP542
12"
54"
AEIP428
18"
42"
AEIP548
18"
54"
AEIP424
24"
42"
AEIP544
24"
54"
AEIP420
30"
42"
AEIP540
30"
54"
NOTE: For ceilings over 9', decorative flues are not available.
If a drywall box will be built instead of installing decorative flue cover, use drywall trim to hide hood and drywall junction. Refer to table
below to find the appropriate model for your hood width.
3. PREPARE THE INSTALLATION
When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves.
Remove the installation kit from inside the hood.
Make sure that the following items are included:
- Installation manual
- Accessories including:
• 3 Evolution™ hybrid baffle filters
• Shielded halogen lights (GU10 type base, 120 V, 50 W) (6 for 42" width hoods, 8 for 54" width hoods)
• Bag of parts including:
(10) steel wood screws no. 10 x 1.5'', (10) steel washer no. 10, (6) screws no. 8 x 3/8'' (additional screws provided)
Parts sold separately:
- Interior blower Model P6 (includes rough-in kit).
- Interior blower Model P12 (includes rough-in kit).
- In-line blower assembly ILB3, ILB6, ILB9 or ILB11 (all include transition and rough-in plate)
- Exterior blower assembly EB6, EB9, EB12 or EB15 (all include rough-in plate).
- Transitions, duct, elbows, dampers, wall and roof caps. Refer to pages 3 and 4 for a complete list of venting options and model numbers.
- Optional decorative flue cover AEIP Series, 12'', 18", 24" or 30" height and 42" or 54" width.
- Optional dry wall trim ATDIP Series, 42" or 54" width.
L
L
™ E
H
INK
OGIC
NABLED
OOD
This hood includes the LinkLogic system which allows communication over ordinary household electrical wiring to other LinkLogic
devices including the Broan Smart Sense Fan system. If you intend to use this hood with another LinkLogic device, follow the instructions
found in section 21 along with the instructions that come with the LinkLogic device you plan to use.
8' C
EILING
D
DISTANCE FROM COOKTOP
30"
36"
X
X
X
X
M
ODEL
ATDIP42
ATDIP54
9' C
EILING
ISTANCE FROM COOKTOP
30"
36"
X
X
X
X
W
IDTH
42"
54"
CAUTION
- 6 -
Framework
flush to ceiling
Decorative flue
cover or drywall
with trim
Minimum distance between
the hood and cooktop:
30'' (762 mm)
Recommended maximum
distance between the hood
and cooktop: 36'' (914 mm)
Standard 36"
(914 mm)
high cooktop
HH0084A
MINIMUM AND MAXIMUM DISTANCE
OVER COOKTOP
A
Publicidad
Tabla de contenido
