Clean-Up - Homeright Pro 5.0 Manual De Instrucciones

Clean-Up

Cleaning your sprayer properly is critical to maintaining its best possible performance every time you
use it. Dried paint or stains act like glue and will cause moving parts to stick. Failure to properly clean
and lubricate your sprayer will also cause damage to the unit. Taking the time to clean and lubricate
your sprayer immediately after use will help it last longer and work correctly. If you are finished with
the project or are not going to use the sprayer the rest of the day you must follow these instructions
for proper clean-up and lubrication. Never store the sprayer longer than 30 minutes without cleaning or
the paint/stain will begin to dry and cause issues with spraying at a later time.
1
Unplug the unit. Pour the left over material back
into the original container.
4
Plug in the unit. Squeeze the trigger and spray
into a second container until the cleaning
solution coming through the sprayer is free of
material.
English
12
2
Fill the container half full of the cleaning
solution appropriate to the type of material you
sprayed.
5
Unplug the unit. Remove the container and
strainer tube (or suction tube kit if used), and
properly dispose of the remaining solution.
3
If you used the optional suction tube kit, remove
the suction tube from the material container
and submerge into a container of the cleaning
solution appropriate to the type of material you
sprayed.
6
With sprayer unplugged, unscrew spray tip and
remove atomizer valve.
www.homeright.com