Clearing The Memory; Clear Memory; Software Functions - Microlife BP3AX1-4U Manual De Instrucciones

character.
Press OK (M) to accept the character and
move to the next space.
After you have finished entering the name,
press OK to exit the user setup menu. The
user name is displayed on the screen.

6.3. Clearing the Memory

This item enables you to clear readings for
user 1 or user 2. You can erase single
readings, or erase all readings at once.
Select user 1 or user 2 as explained under
section 6.2. Scroll to Clear Memory and
press OK. The user you selected is shown
in the upper left corner.
Clear Single Readings
Select «SINGLE» by the selection buttons
and press OK to erase single readings.
Press or to select a reading from the
list. An arrow
reading. Press OK to erase the selected
reading.
Clear All Readings
Select «All» by the selection buttons and
press OK to erase all readings of the
selected user. You are prompted to confirm
the action. Press OK to erase all readings
of the selected user. Press the 0N/OFF/START
button to cancel deletion of all readings.

7. Software Functions

(For more detailed information, see instructions included on the CD)
Measurements stored in your wrist unit can be downloaded to your PC using the
enclosed software. Your PC will allow a capacity of monitoring 80 patients, each
with 1000 data (note: overuse will lower system efficiency).The memory data can be
14
highlights the selected
Apr 17 2006
JAMES MAM

CLEAR MEMORY

CLEAR MEMORY
3/06
No. SYS DIA PUL
1 124 84
2 139 95
3 139 98
CLEAR MEMORY
CLEAR ALL?
YES=[M]
NO=[ON/OFF/START]
ALL
15:48
76
74
80